Technology Overview

FRAME HOUSES. Heat and fast

When building frame houses, we use galvanized metal frame as a bearing system, as well as any options for exterior decoration. Often a metal frame house can not be distinguished from a brick one – the same brick outside or facade plaster. In addition, we also use siding, fiber cement panels; the walls themselves can be filled with a monolithic foam concrete. If the insulation is made of stone or mineral wool, the house will be warmer. You can also use cellulose or mineral blowing wool.

More about the technology of frame construction…

FOAM CONCRETE & GAS CONCRETE. Inexpensive alternative to brick. It’s already warmer …

We use only blocks of two or three largest manufacturers. This technology gives comparatively good results when facing the house with facade brick, siding, plaster of the “bark beetle” type. With a wall thickness of 300 mm, we recommend the use of insulation. The type of insulation depends on the external finish – it can be a technology “wet facade”, and any others.

More about the technology of construction from foam and aerated concrete…

BRICK. Beautiful, monumental, and … it’s cold.

The most common technology in Russian. According to the new SNiPs, and in the darkness of the owners of the houses, the thick wall of one and a half bricks is not enough to provide comfortable living conditions – it is cold and wasteful for energy carriers. Conclusion: the brick house needs to be insulated. For this purpose we offer several options: to make a well, to warm the house using the technology of “wet facade”, to perform only the exterior finishing of the facing brick, and the house itself in a frame with insulation (such a house will receive all the advantages from both technologies). In addition, if you have a plot with poor soils, the brick may not be suitable because of the loads. Not the best option and brick extensions to existing buildings, as well as building on someone else’s (made not by you, long ago, with violations) foundations. In the case of the latest options, it is better to use lightweight structures. Do not insulate such a (and any other) house foam.

THERMAL CERAMICS. At last the brick became warm.

Of course, thermoceramics can not compare with frame houses for the quality of heat savings, but it is essentially warmer than ordinary bricks. The secret lies in the special multi-hollow form of the block. The block itself is obtained from the same clay as ordinary brick. Dimensions of the blocks allow the construction of bearing walls and partitions with a thickness of 380 or 510 mm. The house of thermo-ceramics always needs exterior decoration. It can be: facing brick, plaster, Dagestan stone, any variants of hinged facades and other options.

GLUED BRUS. Now the tree has no flaws. Expensive…

Build houses from glued beams in Baku not so long ago, the reason for this – the absence of nearby forests and, as a consequence, the traditions of wooden housing construction. Houses made of laminated veneer lumber are ideal for homes, bathhouses, hotels. Breathes in such houses as in the forest. To the house was warm, the thickness of the timber should be appropriate. The shrinkage of such houses does not exceed 1.5%, the interior finish is minimized. The color of the house and interior can be anything from chocolate to peach. Glued beam is one of the most expensive technologies. We offer houses made of laminated veneer lumber from several companies: the world leader in wooden house construction (more than 2,000 houses per year) – KONTIO (Finland) and the leader of the Russian market – the company NLK Domostroenie


This technology – perhaps the best solution for a bath or a country house, provided that the house is built by professionals. If houses of glued beams do not suit you because of the high price, build a frame. Choose cylindered, if you want the ideal geometry of logs. This is the most “dangerous” technology: many nuances and details, many things “come out” in a year, a layman is always difficult to take work (unless through the wall you can not see the street). It may seem that the frame – it’s cheap, especially if you buy a house in Baku and a local brigade to instruct the assembly. But think in advance where to look for this brigade, when the wall starts to retreat or jam the door from shrinkage?

SUPERSTRUCTURE MANSARD. Carlson no longer lives on the roof.

Have you decided to build a floor or an attic? Correct solution. We carry out the design and construction of floors and attics in private and multi-apartment buildings, if necessary, we will conduct a survey of the building.

Our advice: start with an architectural project, because the most expensive mistakes are errors at the design stage. Only after making the project, you will be able to understand before the construction starts where the staircase will go, whether there will be a piano and a bed on the 2nd floor in the bedroom, and in general how many and what rooms on the new floor will turn out. In addition, you can see the new look of the house with an already built attic or floor.

We design the architectural part of the attics at a ridiculous price – 150 r / m2 of area, and when ordering the construction we return to you 100% of the cost of the architectural project. Let’s also note that, in carrying out the project of the attic, our architect does not just draw pictures, he also interacts with the designer, taking into account the materials actually used and their features.

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar